Please see attached for the Zenvida 7 Piece Dining Set manual, there is one for the table and one for the chairs. 


Note regarding Zenvida furniture:


***WARNING***


Power tools may strip bolts or screws. Hand tighten bolts to only about 75% tight. Do NOT completely tighten any bolt during assembly until all bolts are connected.


Thank you!


-The table top has a horizontal support bar in the middle

- In addition, if the table top bends in the middle with very little weight, the table top must be replaced.

- Table measures 55.25" L x 31.5" W x 30" H, weight limit 100 lbs.

- Chairs measure 15.5" W x 14.75" D x 32.5" overall H (17" seat height), weight limit 200 lbs.