Thank you for your recent purchase! Have you noticed that one or two rollers don't spin as smoothly as the rest? We have a solution!

With any skates that arrive factory direct, they require an initial inspection and regular maintenance. The factory uses a heavy grease to protect the bearings before they get to you. The bearings within the rollers require regular maintenance.

If you notice a roller sticking, you can spray a tiny bit of brake cleaner on the bearings and spin them until they loosen up. Keep in mind that there are two bearings on each wheel, one on either side. 

Once the bearings are fully covered with the brake cleaner, let them dry for a while. We recommend a day or so. Then re-lube them with a little bit of WD-40. Now your skates are ready to use again!